ALL ABOUT THE 3G MOBILE TECHNOLOGY

1. 3G Systems

3G Systems are intended to provide a global mobility with wide range of services including telephony, paging, messaging, Internet and broadband data. International Telecommunication Union (ITU) started the process of defining the standard for third generation systems, referred to as International Mobile Telecommunications 2000 (IMT-2000). In Europe European Telecommunications Standards Institute (ETSI) was responsible of UMTS standardisation process. In 1998 Third Generation Partnership Project (3GPP) was formed to continue the technical specification work. 3GPP has five main UMTS standardisation areas: Radio Access Network, Core Network, Terminals, Services and System Aspects and GERAN.

3GPP Radio Access group is responsible of:

Radio Layer 1, 2 and 3 RR specification

Iub, Iur and Iu Interfaces

UTRAN Operation and Maintenance requirements

BTS radio performance specification

Conformance test specification for testing of radio aspects of base stations

Specifications for radio performance aspects from the system point of view

3GPP Core Network group is responsible of:

Mobility management, call connection control signalling between the user equipment and the core network.

Core network signalling between the core network nodes.

Definition of interworking functions between the core network and external networks.

Packet related issues.

Core network aspects of the lu interface and Operation and Maintenance requirements

3GPP Terminal group is responsible of:

Service capability protocols

Messaging

Services end-to-end interworking

USIM to Mobile Terminal interface

Model/framework for terminal interfaces and services (application) execution

Conformance test specifications of terminals, including radio aspects

3GPP Services and System Aspects group is responsible of:

Definition of services and feature requirements.

Development of service capabilities and service architecture for cellular, fixed and cordless applications.

Charging and Accounting

Network Management and Security Aspects

Definition, evolution, and maintenance of overall architecture.

Third Generation Partnership Project 2 (3GPP) was formed for technical development of cdma2000 technology which is a member of IMT-2000 family.

In February 1992 World Radio Conference allocated frequencies for UMTS use. Frequencies 1885 - 2025 and 2110 - 2200 MHz were identified for IMT-2000 use. See the UMTS Frequency page for more details. All 3G standards are still under constant development. In 1999 ETSI Standardisation finished for UMTS Phase 1 (Release '99, version 3) and next release is due December 2001. UMTS History page has a list of all major 3G and UMTS milestones. Most of the European countries and some countries round the world have already issued UMTS licenses either by beauty contest or auctions.

2. UMTS Services

UMTS offers teleservices (like speech or SMS) and bearer services, which provide the capability for information transfer between access points. It is possible to negotiate and renegotiate the characteristics of a bearer service at session or connection establishment and during ongoing session or connection. Both connection oriented and connectionless services are offered for Point-to-Point and Point-to-Multipoint communication.

Bearer services have different QoS parameters for maximum transfer delay, delay variation and bit error rate. Offered data rate targets are:

144 kbits/s satellite and rural outdoor

384 kbits/s urban outdoor

2048 kbits/s indoor and low range outdoor

UMTS network services have different QoS classes for four types of traffic:

Conversational class (voice, video telephony, video gaming)

Streaming class (multimedia, video on demand, webcast)

Interactive class (web browsing, network gaming, database access)

Background class (email, SMS, downloading)

UMTS will also have a Virtual Home Environment (VHE). It is a concept for personal service environment portability across network boundaries and between terminals. Personal service environment means that users are consistently presented with the same personalised features, User Interface customisation and services in whatever network or terminal, wherever the user may be located. UMTS also has improved network security and location based services.

3. UMTS Architecture

A UMTS network consist of three interacting domains; Core Network (CN), UMTS Terrestrial Radio Access Network (UTRAN) and User Equipment (UE). The main function of the core network is to provide switching, routing and transit for user traffic. Core network also contains the databases and network management functions.

The basic Core Network architecture for UMTS is based on GSM network with GPRS. All equipment has to be modified for UMTS operation and services. The UTRAN provides the air interface access method for User Equipment. Base Station is referred as Node-B and control equipment for Node-B's is called Radio Network Controller (RNC). UMTS system page has an example, how UMTS network could be build.

It is necessary for a network to know the approximate location in order to be able to page user equipment. Here is the list of system areas from largest to smallest.

UMTS systems (including satellite)

Public Land Mobile Network (PLMN)

MSC/VLR or SGSN

Location Area

Routing Area (PS domain)

UTRAN Registration Area (PS domain)

Cell

Sub cell

YOU WILL FIND DIFFERENT EMAIL ADDRESS LIST EVERY WEEK

http://www.datasample.blogspot.com

http://www.datasample1.blogspot.com

http://www.datasample2.blogspot.com